Torque Cable Component Wall Mount Station

Add a single station wall-mounted Cable Component station to your facility or home. Built with commercial-grade components that stand up to repeated use. Rear wall mounted brackets and weight stack arecovered by a tinted shroud that minimizes noise and keeps fingers away from moving parts.

4:1Weight Ratio provides a starting weight of 5 lb (2.26 kg) per handle. The graduated weight stack provides increments of5 lbs per handle for the entire weight stack (weight is doubled to 10 lb (4.5 kg) if both handles are used simultaneously). The total weight of the stack is320 lbs (230.9 kg).

Independent Dual Swivel Pulleys on the cable column allow users to perform exercises using separate cables attached to the same weight stack.The pulley can be slid along the chrome column to easily adjust to the desired height.

Features include:

4:1 graduated 320 lb (145.1 kg) weight stack
Dual Swivel Pulleys
16.75 ft (5.1 m) of cable travel with an individual handle
Storage Hooks to hang accessories
Movement Placard
Each Cable Column comes with the following accessories

(2) Short Strap Handles
(2) Tricep Ropes
(1) Leg Boot
(4) Wall-Mountable Accessory Storage Hooks

*Note: Must be anchored securely to the wall. Mounting hardware (lag bolts) is
not included.

PRODUCT INFORMATION


FOOTPRINT (L X W X H)	25.5 x 25.5 x 93.7 (65 cm x 65 cm x 238 cm)
WEIGHT	461 lb (209.1 kg)
WEIGHT STACK	320 lbs (230.9 kg)
COMPATIBILITY	Wall Mount
MINIMUM REQUIRED LIVE AREA	4 x 7 (1.2 m x 1.8 m)
WARRANTY	10 year frame and welds – 1 year parts – 90 days misc.

Resources:

Owner’s Manual